I have a new to me 2010 Mooto X YBB. Someone help me on if I need a high or low mount FD. Going with XT or XTR. Thanks!
I have a new to me 2010 Mooto X YBB. Someone help me on if I need a high or low mount FD. Going with XT or XTR. Thanks!
ok, so maybe there is not a right answer. what are you guys using and why? Thanks.
I use a high mount XTR 970 series. Why? Cause it's the best. :-)
I have a 2011 MX YBB with 2011 XTR 2x10. I had to use the Shimano XTR M985 low clamp front derailleur. All good.
Be careful with your group choice. Moots made a change in Oct. of 2010 to allow for the new 2x10 XTR group. On the Mooto X YBB's made before that, the Shimano XTR group will not work (but SRAM 2 x10 will work if I recall correctly). Strongly suggest emailing Moots with your frame serial number and verify the date of manufacture. I had a few hiccups getting my ride up and running, but am loving it now.
Thanks. I actually have a frame that was manufactured before Oct 2010. I have an XX crank on now, but am running XT/XTR everywhere else. I think I should be good as if i recall, the crank was the issue.
You must log in to post.