My measurements as follows:
Height: 5’8” (173.04cm)
Weight: 150 lbs
Inseam 31.5” (80.01 cm)
Torso 23.5” (59.7 cm)
Arm 24.75” (62.87 cm)
Shoulder: 12” (30.48 cm)
Looking at the stock 18” with curved top tube option. Don’t want to go full custom if I don’t have to.
My current ride which I race and train on is a Lynskey Ridgline med frame set up as a SS.
ETT length: 23.75”
Stand over (measured med position, same location as the YBB) 32”
3/4” seat offset
80mm stem length
¾ bar rise with 9 deg back sweep.
My way of bike set up is typical, Seat position: plumb bob on the knee aligned to peddle pivot, Bar position: Visual sight through bars to align front axle.
The bike feels like it fits perfect for me, less cramped than my 22.8 ETT Mojo full cush 26r.
Aggressive single track, North East, roots rocks, dips and ditches, very technical. A lot of body movement.
Many say that I should be running at least a 100-110 stem, with a shorter ETT, I don’t know because I’ve never set up a bike that way.
I will be going to a local bike fitter (sells mostly high end road bikes, and races) this Tuesday to see how far off am.
Since I’m spending this much coin, I want the best handling and set up as possible.
Thanks for any opinions, sorry for the long post