What spacers are you referring to?
Try loctite 660 on the cups with 7008 Primer applied to the ti shell. I have no idea if they will ever come out, but they didn't move on a good 40 mile somewhat fast ride today. Let this cure for an entire day before you ride it. And make sure you get rid of all anti seize and tape residue. I also packed the heck out of the bearings with Phil Wood Waterproof grease(it may minimize benefits of USB bearings, but I don't want to touch these cranks for a long time if this works)
As far as waiting for a solution from Campy, they don't think there is a problem. Their USA service manager informed me that the cups were "up to their spec", they would work on a resolution Monday when they get back from Vegas. Never mind they could make all the cups in the world to match their spec, but the design doesn't work in our bikes. Since we have to have the cranks to use these cups and the cups don't work, I want them to take the cranks and cups back and let me get some other brand BB30 crank I can use with the regular SRAM press fit 30 BB, that holds perfectly in my bike.